棋牌王送彩金

棋牌王送彩金_皓玩棋牌游戏_6080棋牌送彩金_农家乐棋牌送现金

当前位置:返回首页 > 新闻资讯 > 行业资讯 >
新闻中心
电话:13605413887(苏经理)
邮箱:1120779656@qq.com
联系人:苏经理
手机:13181713577(王经理)
网址:http://www.spormac.net
地址:济南市章丘区刁镇工业开发区

工业废气处理设备漏油的原因!

来源:http://www.spormac.net/   发布时间:2019-04-19 17:09:52
  在使用工业废气处理设备一段时间后,有很多人都发现它们会有漏油情况发生。面对这种问题,我们当然是需要寻找方法来解决,不过在此之前,还应该好好分析一下问题的发生原因,再对症下药。
  After using industrial waste gas treatment equipment for a period of time, many people found that they would have oil leakage. Faced with this problem, of course, we need to find a way to solve it, but before that, we should also carefully analyze the causes of the problem, and then prescribe the right medicine.
  1、设备制造的时候精度不良
  1. Poor accuracy in equipment manufacturing
  设备的表面粗糙度过高,同心度差,配合不好等都是属于设备制造与加工的精度不良的范畴。此外,设计不合理也可以将其概括在内。如果在设计的时候,设计人员没有考虑到密封,那么就会造成它与工作状态、温度介质等特性不相适应,从而造成设备漏油的后果。
  Excessive surface roughness, poor concentricity and poor coordination of equipment belong to the category of poor precision in equipment manufacturing and processing. In addition, unreasonable design can also be summarized. If the designer fails to consider the sealing when designing, it will result in incompatibility with the working state, temperature medium and other characteristics, thus causing the consequence of oil leakage of equipment.
  2、管理不严格
  2. Lack of strict management
  可以说这是废气处理设备漏气的最重要原因之一。例如,密封元件达到了使用寿命,但没有得到及时的更换,那么就会造成漏气的结果。
  It can be said that this is one of the most important reasons for the leakage of waste gas treatment equipment. For example, if the sealing element has reached its service life, but has not been replaced in time, it will result in air leakage.
  3、安装方法不正确
  3. Installation method is incorrect
  除了以上两点,设备的安装位置不正,偏心过大,装配工艺不正确等原因都会引起废气处理设备漏油。
  In addition to the above two points, the installation position of the equipment is not correct, the eccentricity is too large, the assembly process is not correct and other reasons will cause oil leakage of waste gas treatment equipment.
光氧催化设备
  了解了漏油的原因之后,接下来就是正确解决漏油问题了。
  After understanding the causes of the oil spill, the next step is to correctly solve the problem of oil spill.
  1、如果是因为设备的密封性不行,那就改用不易泄露的密封材料,,重新设计密封结构,从而达到无泄露的要求。
  1. If the sealing ability of the equipment is not good, the sealing material that is not easy to leak should be changed and the sealing structure should be redesigned to meet the requirement of no leakage.
  2、修理那些引起泄露的零件,焊、粘气孔、裂纹,刮、磨修复密封部位,从而提高密封面的精度。
  2. Repair the parts that cause leakage, weld, stick gas holes, cracks, scrape and grind to repair the sealing parts, so as to improve the accuracy of the sealing surface.
  以上我们从废气处理设备漏油的原因以及解决方法两个原因出发来介绍了设备漏油应该如何解决。希望以上提出的建议对大家有所帮助。
  Above all, we introduce how to solve the oil leakage of waste gas treatment equipment from the causes and solutions. I hope the above suggestions will be helpful to you all.
相关标签: 光氧催化设备、
  • 关于光氧催化设备的使用优势 光氧催化设备 1、高效除臭:能有效去除挥发性有机化合物、无机物、...
  • 为什么说现在光氧催化设... 近些年我国废气处理设备推广的很快,而废气处理设备应用最广泛就是U...
  • UV净化设备为社会发展带... UV净化设备采用化学方法处理的有机物质,包括烷烃、芳香烃、烯烃、...
  • 光氧催化设备为社会的发... 光氧催化设备采用化学方法处理的有机物质,用于生物气味和细菌的消...
  • 慈溪棋牌赢现金
    棋牌王送彩金_皓玩棋牌游戏_6080棋牌送彩金_农家乐棋牌送现金光氧催化设备厂家-济南冠东环保设备棋牌王送彩金